DYNOJET POWER COMMANDER V PC-V MV W/O2 F4 1078RR 09

Un fioul contrôle for each cylinder in individuel à smaller enclosure "Warm-up" un fioul adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) Reduced size from the PCIII USB Easy to install USB powered from computer; 9 volt adapter is non longer needed Two-position map-switching function built in Chien add any Single Pole Single Throw (SPST) un commutateur and toggle between two different un fioul maps Gear/speed un unputt allows for map adjustment based on gear Analog un unputt allows user to install any 0-5 volt un capteur Build an adjustment table based on analog un unputt such un as boost or temperature Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position un unputt connected Demeure tuning ranges than PCIII USB Enhanced "accel pump" utility For Offroad and ATV, see appropriate catalog under Moose Power Commanders Made in the U.S.A. SECONDARY UN FIOUL MODULE The "basic" mode allows you to have à single un fioul table that simply puts the requested un fioul change in both upper and lower injector module at the same escroquez Allows for the adjustment of all eight-injectors Allows for the un chien utilise of the Dynojet Quick Shifter un capteur on eight-injector bikes which provides added un fioul contrôle and shifter functionality You also map each injector separately, giving you up to 48 complète maps Adjusts both upper and lower injectors by un as much un as +250/-100 % If gear position un unputt is connected to your PCV, you un chien adjust all of the injectors on à "per gear" basis Single un câble connection to the PCV The "basic" mode is the perfect setting for modified engines that require demeure un fioul than four-injectors un chien provide, but do not need the complexity of mapping each cylinder and each gear separately Connects to the upper injector un rail using OEM connectors See application un diagramme for availability QUICK SHIFTER UNE EXPANSION MODULE The QEM allows the Dynojet Quick Shifter un capteur to be used with Power Commander V on bikes that have eight injectors Onze the un capteur is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV POWER COMMANDER V NOTE : QEM is not necessary if using the SFM. UN PC-V MV W/O2 F4 1078RR 09 PC-V MV W/O2 F4 1078RR 09