XL and BUELL CAMS FOR HARLEY-DAVIDSON

Andrews XL and Buell Cams for Harley-Davidson N8 Grind Cams Run To 6500 RPM With Stock Hydraulic Lifters; RECOMMEND SOLIDS NOT BE INSTALLED

SIZES ALLOW THE USE OF STOCK PUSHRODS BASE STOCK

V2 and N2 Are Bolt-In Cams for Stock Applications Designed for Up to 6000 rpm

N3 CAMS ARE BOLT-IN FOR 05-16 883/1200 ENGINES WITH STOCK SPRINGS AND HEADS.

V4 and N4 are for stock or modified Applications and have a Slightly Higher Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr Ipr. RPM Range of 2500-6500

V6 and n6 Designed for Modified 1200s to 80 "and/or High-Compression Pistons: Stock Springs and Hydraulic Lifters recommended; RPM Range 2500-6500

V8 and N8 Designed for Modified 883, 1100 and 1200 Stroker Models; Stock Springs and Hydraulic Lifters recommended; RPM Range 2000-6000

N6 Designed for Modified 1200s to 80 "and/or High-Compression Pistons: Stock Springs and Hydraulic Lifters recommended; RPM Range 2500-6500

N8 Designed for Modified 883, 1100 and 1200 Stroker Models; Stock Springs and Hydraulic Lifters recommended; RPM Range 2000-6000

Made in the U.S.A.

XL and BUELL CAMS