1
/
of
1
S&S, Easy Start Gear Drive M103 Camshaft Kit (IAG) For Harley Davidson
S&S, Easy Start Gear Drive M103 Camshaft Kit (IAG) For Harley Davidson
Usual price
1,235.75 €
Usual price
Offer price
1,235.75 €
Unit price
/
by
Taxes included.
The Shipping expenses They are calculated on the payment screen.
The retirement availability could not be loaded
.585 "Valve Lift.
IAG = Gear Frive Cams with Inner & Outer Drive Gears.
Complete kit with installation hardware, Bearings and Gasket.
BOLT-IN FOR STOCK 103 "ENGINES WITH STOCK 9.7: 1CR UP TO 10.5: 1CR.
Works Well with Un-ported Heads and Great for S&S CNC Ported Heads.
More Power Across RPM Range.
2500-5500 rpm.
Easy Start Cams Make Starting Easier By Reducting The Build-Up of Cranking Pressure in The Cylinders During Starting.
This is Done by Lifting the exhaust valve slightly of its seat, with spring Loaded Compression Release Lobe Inside The Camshaft.
After Starting the Compression Release Lobe is retraction by Centrifugal Force.
The Only Difference Is During Starting Since You Will Now To Electric Start Your Big Inch Engine Effortless, Without The Use of Big Batteries and/Or Starter Motors.
A Stock Starter and Battery Is Enough.
When the Engine is running the camshafts function as regular cams, without any loss in power, torque or anything else.
Note: Required Installation Kit for Easy Start Cams are included in full Kits (IAG) Only.
The Installation Kit for This Kit is Separately Available As 531268 and Compatible with Gear Drive Models Only.
Note: Only 551, 570, 583, 585, HP103 and MR103 Cams Are Bolt-In, All Others May / Will require and require High Lift Valve Springs. Note: Not compatible with Kickstart Models.
Note: Only Camshafts Made Before Jan. 2010 Will
Note: Below 900 rpm you May Hear A Clicking Sound.
Adjust Idele Speed to 1000-1100 rpm.
Fits:> 06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)
IAG = Gear Frive Cams with Inner & Outer Drive Gears.
Complete kit with installation hardware, Bearings and Gasket.
BOLT-IN FOR STOCK 103 "ENGINES WITH STOCK 9.7: 1CR UP TO 10.5: 1CR.
Works Well with Un-ported Heads and Great for S&S CNC Ported Heads.
More Power Across RPM Range.
2500-5500 rpm.
Easy Start Cams Make Starting Easier By Reducting The Build-Up of Cranking Pressure in The Cylinders During Starting.
This is Done by Lifting the exhaust valve slightly of its seat, with spring Loaded Compression Release Lobe Inside The Camshaft.
After Starting the Compression Release Lobe is retraction by Centrifugal Force.
The Only Difference Is During Starting Since You Will Now To Electric Start Your Big Inch Engine Effortless, Without The Use of Big Batteries and/Or Starter Motors.
A Stock Starter and Battery Is Enough.
When the Engine is running the camshafts function as regular cams, without any loss in power, torque or anything else.
Note: Required Installation Kit for Easy Start Cams are included in full Kits (IAG) Only.
The Installation Kit for This Kit is Separately Available As 531268 and Compatible with Gear Drive Models Only.
Note: Only 551, 570, 583, 585, HP103 and MR103 Cams Are Bolt-In, All Others May / Will require and require High Lift Valve Springs. Note: Not compatible with Kickstart Models.
Note: Only Camshafts Made Before Jan. 2010 Will
Note: Below 900 rpm you May Hear A Clicking Sound.
Adjust Idele Speed to 1000-1100 rpm.
Fits:> 06-17 Dyna; 07-17 Softail; 07-16 Touring (NU)
Share
