Brake Light Relay Turn Signals Motogadget m.stop Brake Light Modulator 4000020

Motogadget M-stop relay.

The M-Stop digitally adjustable brake light modulator increases driving safety. With different flashing modes, it enhances the standard brake light, turning it into a conspicuous warning light. Oncoming vehicles will recognize your braking action more quickly and effectively. It can reduce the reaction time of the driver of the vehicle behind you, making it possible to avoid rear-end accidents. The M-Stop is, in all cases, an important additional safety feature for motorcycles, quads, all-terrain vehicles (ATVs), trikes, etc.

Use as a brake light modulator:

• Incredibly small and light, just a cable with a tiny device
the size of a candy
• The cables run together with the M-Stop on the inside of the handlebar, the frame tube
or directly into the wiring harness
• You can choose between six different flashing styles
• Load-independent operation (wide range)
• Suitable for all LED brake light/tail light units or bulbs/lights
standard brake Very easy to install, just connect two cables.
• Short-circuit proof
• Automatic stop due to overload
• Safe against power surges
• Does not generate heat during operation
• Operating voltage from 5V to 18V
• Also suitable for 6 V voltage systems in passenger cars
• Instant, lossless brake light operation
• Completely water and impact resistant

Use as a flasher relay:

• Completely independent of the load (wide range relay); always
stable and with correct flash intensity
• Suitable for all types of Flasher: LED, “Micro” size, bulbs of
10 watts or 21 watts
• Perfect for custom bikes with limited space… the crude relays of
Original flashers from the manufacturer have been forgotten.
• Common load resistors are not necessary
• Works with 1, 2 or 4 Flashers
• Lossless and instantaneous flashing light operation
• Very easy to install, just connect two cables.

m-Stop, the tunable digital brake light modulator for higher road safety

Various blinking modes turn conventional brake lights into an eye-catching hazard light. Successive vehicles can much quicker identify the activated brakes of a leading motorbike. A considerable plus in motorbike safety as bikes are prone to being overlooked. This is especially true with custom bikes and mods with either small or low riding brake lights. Higher end cars already use this technology (adaptive brake lights).

In any case the m-Stop does not have to be removed. Simply reprogramming the rocker switch will suffice.The m-Stop can also be used as flasher relay with automatic deactivation! Security features!

If programmed accordingly, the flasher unit deactivates the turn signal(s) after 20 seconds.

Say goodbye to accidental continuous turn signals!

Application as brake light controller

• ultra compact and light - in essence just a piece of cable attached to a tiny, candy-sized device
• Hassle-free wiring into the wiring harness - just connect in series with the brake light
• 6 different brake light illumination/flashing patterns available
• almost load independent - applicable for almost all LED brake lights (min. 1 Watt) or conventional brake light bulbs
• Completely hassle-free connection using only two cables - just connect in series
• short circuit proof, - automatic overload protection - protection against voltage surges from the on-board system
• no heat generation while operating
• also applicable for 6V brake lights
• immediate loss free and brighter illumination of the brake light - water tight and vibration resistant

Application as flasher relay (with or without automatic deactivation)

• almost load independent (min. 1 Watt)
• always constant flasher frequency
• therefore suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights etc.
• ideal for custom bikes and mods with little mounting space - no bulky conventional relay
• eg works with 4 turn signal lights or 2 handle bar end turn signal lights etc.
• Completely hassle-free connection using only two cables - just connect in series
• also applicable for 6V turn signal lights
• Also applicable as flasher relay with automatic deactivation