1
/
of
3
OPTIMATE USB O-105 SMART 3300mA DUAL OUTPUT USB CHARGER, WITH BIKE PLUG
OPTIMATE USB O-105 SMART 3300mA DUAL OUTPUT USB CHARGER, WITH BIKE PLUG
Usual price
34.23 €
Usual price
Sale price
34.23 €
Unit price
/
by
Tax included.
Shipping calculated at checkout.
The availability of withdrawal could not be loaded
Connects to Ø12 mm DIN / BIKE 12V socket found on BMW and Triumph motorcycles.
Charges 2 x USB devices with up to 3300mA current available to share, or charge 1 x USB-C device fast. – Charge
current adapts to each connected device for safe recharging.
Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap protects USB port not in use – Worry free phone,
camera or GPS charging in any weather!
Monitors and displays parked vehicle’s battery status – Indicates battery is ‘start ready’ at the blink of an LED!
New on this version:
Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery
from draining – Starts back up when vehicle engine fires up.
Charge Connector (Input): 90° BIKE (DIN Ø12 mm) Power (Input): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery Charge Connector (Output): 2x USB (located directly on the charger) Power (Output): 3300mA @5V Operation: fully automatic
Vehicle battery protection: AUTO off 1 hours after engine stopped or if battery voltage drops below 12.4V
Turns on if vehicle battery voltage increases above 13.3V
Short circuit, overheat, over-voltage protection
Operation (Voltage)
USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging
battery
USB 1 HOUR – 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V
STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V
OFF ≤ 9V
Style: Fully enclosed electronic circuitry with blue LED, unique seal and cap design for USB sockets; use any USB
cable, seals when inserted
TECMATE O-105V2
Charges 2 x USB devices with up to 3300mA current available to share, or charge 1 x USB-C device fast. – Charge
current adapts to each connected device for safe recharging.
Creates weatherproof seal against inserted USB cable, or ‘rideproof’ cap protects USB port not in use – Worry free phone,
camera or GPS charging in any weather!
Monitors and displays parked vehicle’s battery status – Indicates battery is ‘start ready’ at the blink of an LED!
New on this version:
Built in protection turns off USB charging & prevents your parked vehicle’s LFP (LiFePO4) or AGM (Pb)battery
from draining – Starts back up when vehicle engine fires up.
Charge Connector (Input): 90° BIKE (DIN Ø12 mm) Power (Input): Vehicle 12V system with 12V lead-acid or 12.8V lithium battery Charge Connector (Output): 2x USB (located directly on the charger) Power (Output): 3300mA @5V Operation: fully automatic
Vehicle battery protection: AUTO off 1 hours after engine stopped or if battery voltage drops below 12.4V
Turns on if vehicle battery voltage increases above 13.3V
Short circuit, overheat, over-voltage protection
Operation (Voltage)
USB ON – 13.3V to 18V – unlimited USB output, USB LED on. Delivers USB power when vehicle engine is charging
battery
USB 1 HOUR – 12.4V to 13.3V – 1 hour USB output, USB LED on. Go to standby mode after 1 hour or voltage < 12.4V
STANDBY MODE – Monitoring voltage, turns back on if vehicle battery voltage increases above 13.3V
OFF ≤ 9V
Style: Fully enclosed electronic circuitry with blue LED, unique seal and cap design for USB sockets; use any USB
cable, seals when inserted
TECMATE O-105V2
Share
