Motogadget M.Can Bus Obd for Harley-Davidson 4003000

Motogadget M-Can Data Bus Adapter. To directly connect MotoGadget instruments such as the MINI Motoscope to the Motorcycle Board.

It plugs directly into the motorcycle data connector and provides all the information to the accountckilometers (speed, failure codes, RPM ...).

• It works with the Harley® OBD system, without interfering with it
• With this instrument it is not necessary to set up any sensor to have all the data in the Motogadget instruments.
• Resistant to vibrations and voltage differences.
• It simply connects and shoots, do not program it.
• Dimensions 38x19x13mm.
• Not valid for models with Can-Bus

Motogadget M.Can Obd

The M.Can is a Digital Adaptor for The Hassle-Free Direct Connection of Our Instruments to the Diagnostic Interface of Post-2004* Harley-Davidson ™ Machines. Plug & Drive - It Doesn't Get Easier! 

A Tiny Black Box Frees You of the Necessity To Install Speed ​​Or RPM Sensors. Everyy Harley-Davidson Machine Later Than 2004* Is Equipped With This 3-Pin Connector Interface. With the m.can Digital Digital Adaptor Simply Plugged into the interface, your motorogadget instruments can Read data Straight from the SAE J1850 Machines Data Bus: Speed, RPM and Mil (Check Engine Warning Light). VOLTAGE SUPPLY OVER THE OBD DATA BUS IS ALSO OPTIONAL, POSIBLE MAKING THE OPERATION OF E. g. The Motoscope Mini Without Any Installation procedures to the bike. 

The instrument is simply connected to the m.can obd. All Compatibility Issues Between Instruments and Original Speed ​​Sensors - Specially W/ H -D Models Since 2007 - Are Solved. Also, The Signal for the Mil/Malfunction Warning is read the engine as well as periphell and can be read by installing a led/indicator light. This Means That All Original Instruments are Redundant and May Be Removed **. The M.Can Obd Consists of Only A Tiny, Completely Moulded-in Box, an ODB-Connector and A Sufficiently Long Connector Cable. It is resistant against vibrations and environmental exposure. IT's Serviceability Is Reured Even With Less Than 5V System Voltage and Meets All Sae-Specifications for Motorcycles. 

* The Application Is Not Possible With H-D Softtails Model Year 2011, Dyna Model Year 2012, XL Model Year 2014 and Up. Also Not Possible with All Other Models with HD-LAN SYSTEM. FITS ONLY MODELS WITH SAE J1850 SYSTEM. 

** With Certain Models Like the V-Rod, Remaining the original Speedometer May Lead to Problems With The Ecu/Immobiliser. PLEASE Inquire about this at your trusted dealer or test Before Actually performing the modification (e. G. by disconnecting the original Speedometer). In summar, The Immobiliser has to be deactivated.