Kraus, Insulated Straight Risers without Lid for Harley Davidson

10" lift.

Raw machined aluminum finish.

With 1" (25.4mm) diameter handlebar clamp area.

Sold without top clamp; top clamp (top plate) sold separately depending on application.

These isolated risers are designed for solid mounting to the top post and install with the included billet bushings.

This creates a much stiffer handlebar setup, allowing for better control and greater utilization of the bike's suspension and braking.

For vibration damping, rubber bushings are relocated just below the handlebar, within the center section of the riser.

The exclusive use of these rubber isolators drastically reduces unwanted movement in the bushings. This creates a much more solid handlebar feel, giving you greater confidence in handling your bike. You'll immediately notice the difference between the rigid-mount riser legs and the relocated rubber isolators.

- Much less vibration than rigid mount risers and much better handlebar feel.

- The bottom clamp has an opening to accommodate hidden wiring.

- The top clamp (top plate) must be purchased separately depending on your application.

- 3.5" center-to-center spacing for standard OEM HD mounting

- Longer bushing life and lower maintenance

- Wiring slot in the center of the lift body for easy installation and clean wiring. Note: Sold without a top clamp; the top clamp (top plate) is sold separately depending on the application.

Note: Kraus insulated risers are designed for universal mounting.

Some modifications may be required depending on the application.

This product is NOT compatible with models that include bar clamps integrated into the top seat post clamp.

Note: Kraus insulated lifts are of modular construction.

You can install them without legs or change the riser legs to optional lengths if you decide to install a shorter or taller riser in the future.

See the "Optional Legs for Insulated Riser" section for 4 available lengths, from 89 mm (3.5") to 241 mm (9.5") high.

Compatible with: > HD with 8.9 cm (3.5") center-to-center mounting holes