Kraus Insulated Kickback Risers Without Lid for Harley Davidson

5" lift.

Raw finish of uncoated machined aluminum.

Compatible with models with 1-1/8" (28 mm) handlebar clamping area.

Sold without top clamp; top clamp (top plate) sold separately depending on application.

The Kickback style moves the handlebar 1.5" (38 mm) towards the rider.

These isolated risers are designed for solid mounting to the top post and install with the included billet bushings.

This creates a much stiffer handlebar setup, allowing for better control and greater utilization of the bike's suspension and braking capabilities.

For vibration damping, rubber bushings are relocated just below the handlebar, within the center section of the riser.

The exclusive use of these rubber isolators drastically reduces unwanted movement in the bushings.

This creates a much more solid handlebar feel, giving you greater confidence in your bike's handling. You'll immediately notice the difference between the rigid risers and the relocated rubber isolators.

- Much less vibration than with rigid risers and a much better handlebar feel.

- The bottom clamp has an opening for hidden wiring.

- The top clamp (top plate) must be purchased separately depending on the application.

- 3.5" center to center distance for standard OEM HD installation.

- Longer bushing life and lower maintenance.

- The wiring slot in the center of the lift body facilitates installation and wiring. Note: Sold without a top clamp; the top clamp (top plate) is sold separately depending on the application.

Note: Kraus insulated lifts are designed for universal fit. Some modifications may be required depending on the application.

This product is NOT compatible with models that include bar clamps integrated into the top clamp of the seat post.

Note: Kraus insulated lifts are of modular construction.

You can install them without legs or change them to optional lengths if you decide to install a shorter or taller riser in the future.

See the "Optional Legs for Insulated Riser" section for 4 available lengths, from 89 mm (3.5") to 241 mm (9.5") high.

Compatible with: > HD with 8.9 cm (3.5") center distance to center mounting holes