Kraus Insulated Lifters Without Lid for Harley Davidson

5" lift.

Black anodized finish.

Sold without top clamp; top clamp (top plate) sold separately depending on application.

The "Kickback" style moves the handlebar 38 mm (1.5") towards the rider.

These isolated risers are designed for solid mounting to the top post and install with the included billet bushings.

This creates a much stiffer handlebar, allowing for better control and greater use of the bike's suspension and braking.

To dampen vibrations, rubber bushings are relocated just below the handlebar, within the center section of the riser.

The exclusive use of these rubber isolators drastically reduces unwanted movement in the bushings. This creates a much more solid handlebar feel, giving you greater confidence in handling your bike. You'll notice the difference between the rigid-mount riser legs and the relocated rubber isolators immediately.

- Much less vibration than rigid mount risers and much better handlebar feel.

- The lower clamp has an opening to accommodate hidden wiring.

- The top clamp (top plate) must be purchased separately depending on the application.

- 3.5" center-to-center spacing for standard OEM HD installation. - Longer hub life and reduced maintenance.

- The wiring slot in the center of the lift body facilitates installation and wiring. Note: Sold without a top clamp; the top clamp (top plate) is sold separately depending on the application.

Note: Kraus insulated risers are designed for universal fit.

Some modifications may be required depending on the application.

This product is NOT compatible with models that include bar clamps integrated into the top clamp of the seat post.

Note: Kraus insulated lifts are of modular construction.

You can install them without legs or change them to optional lengths if you decide to install a shorter or taller riser in the future.

See the "Optional Legs for Insulated Riser" section for 4 available lengths, from 89 mm (3.5") to 241 mm (9.5") high.

Compatible with: > HD with 8.9cm (3.5") center to center mounting holes.