Camshaft Kit for Harley Davidson M8

This kit includes a 487 Reaper camshaft with chain drive, camshaft installation kit, and Race Series tappets.
487 Reaper Camshaft
Screw-on
Chain drive
38° Overlap
RPM range: 2250 - 61000
Camshaft for 114" and 117" engines
It responds very well to increased diameter and/or compression.
It maintains power at low speeds and offers superior performance at 2950 rpm compared to the stock engine.
Camshaft specifications measured at the tappet at a lift of 0.050 and a rocker arm ratio of 1.61. Camshaft installation kit
Includes cam bearing, cam/crankshaft bolts and gasket/O-ring kit.
Allows installation of factory one-piece push rods or optional 0.165 wall high-strength Feuling® HP+® one-piece push rods.
Race Series Pumps
The hydraulic pumps have a total stroke of 0.200 mm.
Designed with a slower purge rate to withstand high pressures on the valve springs.
It increases engine RPM before valve float and provides greater roller clearance for camshafts with steep ramps and clearance for the Milwaukee Eight front exhaust camshaft lobe flange.
Made in the USA
Heavy-duty, one-piece push rods are highly recommended.
The Feuling® fixing kit is recommended to help prevent cylinder head cracking.
A high-flow exhaust system and air filter are strongly recommended for optimal performance.
High-lift valve springs are required on stock cylinder heads. Screamin' Eagle cylinder heads have high-lift valve springs, but they should be checked.
Feuling® does not recommend modifications that exceed factory emissions standards. Not suitable for VVT engines. Includes: • Chain-driven camshaft • Race Series® tappets • Camshaft installation kit
For 17-25 M-Eight
FEULING PARTS 1462