Dynatek, 2000i Dyna Ignition Module and 1 Coil Kit for Harley-Davidson

2000i ignition module, complete with a Dynatek Twin-Fire II 3 ohm single fire coil.
The module is simply adjustable with switches, nothing else is required.
Features include intelligent overvoltage/overcurrent protection, short circuit protection, and adjustable delay time.
But if you want more... it's fully programmable with the optional available programming kit (902528) and harness (902524).
Another new feature is data recording.
The module records a series of data and stores it.
Recorded data can be downloaded using a PC to show engine manufacturers how the engine was used (or abused), in case there is a problem in the future.
Offers PC programming: * Fully open acceleration curve definable in eight points.
* Fully definable eight-point partial acceleration curve.
* Rev limiter in 50 RPM steps.
* Programmable dead start revolutions 0-10.
* Programmable rear cylinder offset of +/- 10 degrees.
Provides data logging: * Total engine operating hours.
* Time with the accelerator fully open.
* Longer run time at wide open throttle.
* Number of engine starts (2 minutes of operation count as one).
* Maximum RPM.
* Seconds near the rev limit.
*Statistical analysis of time at RPM.
Note: It is recommended to use ignition modules and coils from the same manufacturer.
Mixing different brands can cause premature failure.
The coil should be within the range of 2.5 to 3.5 ohms.
Carbon core, graphite or spiral type suppressor spark plug wires are required.
Do not use copper core cables.
Note: Dyna does not offer the ignition rotor.
The Harley OEM rotor (OEM 32402-83) and mounting bolt (OEM 2611B) must be reused or ordered separately as rotor and bolt kit 920402.
Note: The optional programming kit is available as 902528 (includes software, USB connections and operating instructions).
Programming harness 902524 (Programming Harness, Pigtail) is required.
It is installed on the bike, it is the link between the ignition and the USB) to program the 2000i ignition module.
Note: Not compatible with kickstart models.

Fits: > 70-99 Big Twin (excl. Twin Cam) and 71-03 XL