1
/
of
1
COMMERTIC BOARD KIT, ONLY EST. 4,125 diameter for Harley Davidson
COMMERTIC BOARD KIT, ONLY EST. 4,125 diameter for Harley Davidson
Usual price
160.00 €
Usual price
Offer price
160.00 €
Unit price
/
by
Taxes included.
The Shipping expenses They are calculated on the payment screen.
The retirement availability could not be loaded
With inner diameter butt joints of 4-1/8 "mls (multicapa steel) of 0.040".
With 99-10 style vent joints and previous-style valve stem stamps 99-04.
These EST (Extreme-Sealing-Technology) meet games are complete with all toric seals, seals and joints that are used in the specific H-D model mentioned, excluding the primary joints.
It is the easy way to perform a complete review and have all the necessary joints in a single package to re -assemble the engine.
This set set contains MLS Curate Boards (MulticaPa Steel) that eliminate the use of pinwide toric joints.
The base joints are SLS (single -layer steel) of 0.020 "thick.
They have 0.005 "high temperature viton rubber on both sides and are the strongest in the market.
The balancing lid joints are also 0.020 "thick.
They will not spill, they will extrush, tear or become brittle over time.
The exhaust joints will not hinder the flow of the exhaust gases and will not be frayed in the exhaust port.
Valve seals use viton rubber and exterior springs. For a perfect seal.
- MLS = MulticaPa steel explanation: It consists of an upper and lower layer of stainless steel for springs that is covered by high temperature rubber on both sides.
The inner ring is also stainless steel.
These 3 -layer joints are riveted with each other, outside the surface of the Board, to facilitate the installation.
MLS butt joints eliminate the use of toric joints with a pin.
Compatible with:> 99-17 Twin Cam (except Twin Cooled). Including old valve stem stamps 99-04 and Style 99-10
With 99-10 style vent joints and previous-style valve stem stamps 99-04.
These EST (Extreme-Sealing-Technology) meet games are complete with all toric seals, seals and joints that are used in the specific H-D model mentioned, excluding the primary joints.
It is the easy way to perform a complete review and have all the necessary joints in a single package to re -assemble the engine.
This set set contains MLS Curate Boards (MulticaPa Steel) that eliminate the use of pinwide toric joints.
The base joints are SLS (single -layer steel) of 0.020 "thick.
They have 0.005 "high temperature viton rubber on both sides and are the strongest in the market.
The balancing lid joints are also 0.020 "thick.
They will not spill, they will extrush, tear or become brittle over time.
The exhaust joints will not hinder the flow of the exhaust gases and will not be frayed in the exhaust port.
Valve seals use viton rubber and exterior springs. For a perfect seal.
- MLS = MulticaPa steel explanation: It consists of an upper and lower layer of stainless steel for springs that is covered by high temperature rubber on both sides.
The inner ring is also stainless steel.
These 3 -layer joints are riveted with each other, outside the surface of the Board, to facilitate the installation.
MLS butt joints eliminate the use of toric joints with a pin.
Compatible with:> 99-17 Twin Cam (except Twin Cooled). Including old valve stem stamps 99-04 and Style 99-10
Share
