Intermittent Brake Light Relay Motogadget m.stop Brake Light Modular 400000020

Motocadget M-stop relay.

The digital adjustable modulator of the M-Stop brake light increases driving safety. With different flash modes, it will allow to improve the standard brake light by making it a striking warning light. Vehicles that circulate around will recognize better and faster their braking action. It can reduce the reaction time of the driver of the vehicle that is behind it, making it possible to avoid accidents by reach. The M-Stop is, in all cases, an important additional element for the safety of motorcycles, quads, all-terrain vehicles (ATVs), Trikes, etc.

Use as a brake light modulator:

• Incredibly small and light, simply a cable with a tiny device
the size of a candy
• The cables go together with the M-Stop inside the handlebar, the tube of the frame
or directly on the cable mace
• You can choose between six different flash styles
• Independent load operation (wide range)
• Suitable for all light brake/light LED light units or light bulbs/lamps
Very easy to install standard brake, you only need to connect two cables.
• A short circuit test
• Automatic stop for overload
• Insurance against spikes in tension
• Does not generate heat during operation
• 5V to 18V service voltage
• Also suitable for 6 V voltage systems of passenger cars
• Operation of the brake light without loss and instantaneous
• Completely resistant to water and impacts

Use as a relay of intermittency:

• Completely independent of the load (wide range relay); always
stable and with correct intensity of flash
• Suitable for all types of Flasher: LED, size "Micro", light bulbs
10 watts or 21 watts
• Perfect for custom bikes with limited space ...
Manufacturer's original flashback has gone into oblivion
• Not necessary the vulgar load resistances
• Works with 1, 2 or 4 Flashers
• Operation of flashing light without loss and instantaneous
• Very easy to install, just connect two cables.

m-Stop, the tunable digital brake light modulator for higher road safety

Various blinking modes turn conventional brake lights into an eye-catching hazard light. Successful vehicles can much quicker identify the activated brakes of a leading motorbike. A considerable plus in motorbike safety as bikes are prone to be overlooked. This is especially true with custom bikes and mods with either small or low riding brake lights. Higher end cars already use this technology (adaptive brake lights).

In any case the m-Stop does not have to be removed. Simply reprogramming the rocker switch will suffice. The m-Stop can also be used as flasher relay with automatic deactivation! Security feature!

If programmed accordingly, the flasher unit deactivates the turn signal (s) after 20 seconds.

Say goodbye to accidental continuous turn signals!

Application as brake light controller

• ultra compact and light-in essence just a piece of cable attached to a tiny, candy-sized device
• hassle-free wiring into the wiring harness-just connect in series with the brake light
• 6 different brake light illumination/flashing patterns available
• almost load independent-applicable for almost all LED brake lights (min. 1 Watt) or conventional brake light bulbs
• utterly hassle-free connection using only two cables-just connect in series
• short circuit proof,-automatic overload protection-protection against voltage surges from the onboard system
• no heat generation while operating
• also applicable for 6 V brake lights
• immediate loss free and brighter illumination of the brake light-water tight and vibration resistant

Application as flasher relay (with or without automatic deactivation)

• almost load independent (min. 1 Watt)
• always constant flasher frequency
• therefore suited for almost all LED turn signal lights, all micro and halogen turn signal lights as well as all 10-watts and 21-watts turn signal lights etc.
• ideal for custom bikes and mods with little mountain space-no bulky conventional relay
• e. g. works with 4 turn signal lights or 2 handle bar end turn signal lights etc.
• utterly hassle-free connection using only two cables-just connect in series
• also applicable for 6 V turn signal lights
• Also applicable as flasher relay with automatic deactivation