Bel-ray, brake fluid DOT 5 silicone 355 cc for Harley Davidson

355 cc can. 
DOT 5 does not absorb water and has a boiling point of 260 ° C. 
Insurance for plastics and painted surfaces. 
Exceeds DOT 5 and FMVSS 116 specifications. 
It is not compatible with anti -lock brakes because the end5 foam foam. 
Note: Do not mix with DOT 3 and 4 brake fluids. 
Note: It is not compatible with ABS brakes or ASR systems (non -slip). 
TECHNICAL TIP: Something about the DOT Silicone. If you want to use DOT 5, it may be easier to decide with additional knowledge about this type of brake fluid. 
Dot 5 silicone is not aggressive for painted and plastic surfaces and has anticorrosive characteristics, it is not hygroscopic and, therefore, does not absorb water. 
Excellent characteristics for vehicles that are not used much. 
However, when water accumulates in the brake system over time and is not absorbed by brake fluid, in theory it could create water bags that could boil in extreme circumstances. 
This could cause steam block and a total brake failure. 
Since the DOT 5 silicone does not absorb water, it is possible that accumulated water is not completely removed from the brake system when the brake fluid is changed. 
Dot 5 silicone can never be mixed with Dot 3 or 4 brake fluids. 
Nor is it compatible with ABS (anti -lock brake system) or ASR. 
Note that H-D Motor Company has used Dot 5 to approximately 2006, approximately the time when the ABS was introduced ...

Compatible with:> Softail, Dyna, V-ROD until 2005, FLT/Touring until 2004, XL until 2006