Shock Mounting Kit Chrome F*St84-17 for Harley-Davidson
Shock Mounting Kit Chrome F*St84-17 for Harley-Davidson
The retirement availability could not be loaded
We have created Sportster Frame with the Same Sleek Design As Our Wide Tail Softail Frame. The Sportail Frame Features A "Stretched Low-Rider" Look, is made from Thick Wall Quality Tubing and Tig-Welded for Improved Strength and Road Holding Without Disturbing the Lines. To obtain the Sleek Stretched Low-Rider Look The Steering Head is Raked To 38 Degrees. This requires 4 "to 8" oversock fork depending on the wheel and tire size used. The Engine Is Located With No Offset in the Frame and a Rear Frame section Wide Enough To Accept Extra Wide Tires. The Sportail Surass, Is Wide Enough To Take Up To 250 Wide Rear Tires. In combination with final Belt drive. The surfaces requires an off-set front pulley or a spacer Behind the Front Pulley. Polley Cover Requirements Spacing. The Length of the Frame Requirements The Use of A Drive Belt With Approx. 135 Teeth. Mounts for a Big Twin Side Stand and Big Twin Forward Controls As Well As 1974 to present Sports Forward Controls Are Welded in Place. Stock Style Narrow or Wide Glide Forks As Well As Our State-Of-The-Art Ceriani Forks Can Be used with the frame, it Willings Accept Many OTher Custom Front Forks. The Frame Will Take Any 1974 Thru 1985 Ironhead Sportster Engines As Well As 4 Speed and 1986 Thru 2003 Style 5 Speed Evolution Sportster Engines. Because of the Right Hand Final Drive The Stock Style Softail Oil Tank Does Not Fit, Therefore Our Special Sportail Style Oil Tank Or A Custom Made Oil Tank Such As Our Custom Round Oil Tank Must Be used. The Frame is designated to take a softl Type Parts and Accessors Such As Flat Side Tanks, Forward Controls, Seats and 1989 Thru 1999 Softail Shock Absorbers. Due to the Completely Different Shape of the Swingarm A Rigid Frame Type Rear Caliper Kit Must Be used. 1989 THRU 1999 Softail Shock Absorbers Can Be Found Elsewhere In This Section.
Note: ZODIAC SPORTAIL FRAMES ARE TÜV APPROVED AS A REPLACEMENT FRAME FOR HARLEY-DAVIDSON SPORTSTER MOTORCYCLES. They may be used in combination with our Tüv Approved GCB Front forks and/OR ANY OTHER TÜV APPROVED COMPONENTS.
OEM replaces: 4074
Share
