Elektronikbox C-BS Wiring System for Harley Davidson

The simplest complete wiring system ever seen.
Ideal for custom builds or rewiring older bikes.
Wires from OEM handlebar switches or pushbuttons for the ignition, high and low beam, turn signals, starter, horn, brake light, speedometer, and indicator lights are connected to the C-BS front housing, e.g., mounted in the headlight housing.
The front box also connects to the ignition switch and then, with just three data cables, to the rear box, for example, installed under the seat.
The C-BS rear box connects to the starter relay, taillight, brake light, rear turn signals and ground.
Power, horn and front turn signals can be connected to the front or rear box.
This saves an impressive length of cable, a lot of space and many hours of installation time.
Both the front and rear control modules have dimensions of 50 x 12.5 x 42mm (approx. 2" x 1/2" x 1 5/8"), making it easy to find space for them.
The system can be used with or without sidestand switch control and with or without neutral switch control, 6 to 18 volt system.