1
/
of
1
OPTIMATE 7 12V / 24V 8-Step 12V 10A / 24V 5A SEALED BATTERY SAVING CHARGER & MAINTAINER
OPTIMATE 7 12V / 24V 8-Step 12V 10A / 24V 5A SEALED BATTERY SAVING CHARGER & MAINTAINER
Usual price
181.45 €
Usual price
Offer price
181.45 €
Unit price
/
by
Taxes included.
The Shipping expenses They are calculated on the payment screen.
The retirement availability could not be loaded
SAFE SELECTION FOR 12V OR 24V BATTERY - Will Not Charge If Selected Voltage Does Not Match Battery Voltage!
Automatical Pat
Battery in Any Temperature - Voltage adjusted Higher When Colder, Lower When Hotter!
AMPMATIC CHARGE CONTROL ADJUSTS CURRENT TO MATCH BATTERY SIZE - SMALL BATTERY GETES LESS, LARGE BATTERY GETS MORE!
Saves ‘Dead Flat’ Batteries with ‘Electronics Safe’ Recovery Mode-User Can Over-Ride Voltage Protection for ‘Dead Flat’
24V Battery.
Optimate’s 24-7 Smart Inter-Active Maintenance Prevents Discharge from Connected Circuit & Guarantees More Battery
Power, Longer Battery Life!
New on this version:
No Test Indication When Connecting to the Battery. The Charger Will do the Test, Before It Starts Charging,
but it won’t be visible Any Longer, Too Many User Were Confused During the Led’s Blinking.
Blister Packaging removed for a more envoconmental Friendly Packaging.
New M8-M10 Rings on The O-11 Enclosed.
Ideal for: AGM, GEL & STD 12V (BATTERIES FROM 3 - 400AH) | 24V (BATTERIES FROM 1-2 200AH) Charging AMPS: 10A (AMPMATIC CURRENT) @ 12V / 5A (AMPMATIC CURRENT) @ 24V CHARGING VOLTS: 12V SELECTION: NOMINAL: 12V RANGE: 0.5V- 14.4V; 24V SELECTION: Nominal: 24V Range: 0.5V - 28.8V OPERATION: SELECTABLE FEATURES: Designed for Sensitive Electronics: The Save Program Has Been Designed for Safe Fully Automatic
Low Volt Start (From 0.5 volts) and Pulse Recovery of Deep Dischard Batteries Connected to Vray Sensitive
Electronics E.G. Light Aircraft, Industrial Equipment
USE: Indoor / Outdoor (Lowest Temperature: -40 ° F / -40 ° C) Input: Global (100-240v 50-60Hz), High Efficient (Cec listed) style: Weatherproof case with wall mols, with 6FT / 180 cm AC Supply Lead and 6FT / 180 cm Charge Lead Ending
In Sae Connector
Save: Low volt start of 0.5v + 2-Step Desulplation Recovery Safe: No Risk of overcharging. Totally Safe for Vehicle Electronics. Sparks Suppressed. Safe for Long-Term Battery
Maintenance Automatic Shut-Down If Short-Circuited Or Battery Disconnected
Included: Weatherproof Battery Lead & Battery Clip Set
Tecmate TM-260V3
Automatical Pat
Battery in Any Temperature - Voltage adjusted Higher When Colder, Lower When Hotter!
AMPMATIC CHARGE CONTROL ADJUSTS CURRENT TO MATCH BATTERY SIZE - SMALL BATTERY GETES LESS, LARGE BATTERY GETS MORE!
Saves ‘Dead Flat’ Batteries with ‘Electronics Safe’ Recovery Mode-User Can Over-Ride Voltage Protection for ‘Dead Flat’
24V Battery.
Optimate’s 24-7 Smart Inter-Active Maintenance Prevents Discharge from Connected Circuit & Guarantees More Battery
Power, Longer Battery Life!
New on this version:
No Test Indication When Connecting to the Battery. The Charger Will do the Test, Before It Starts Charging,
but it won’t be visible Any Longer, Too Many User Were Confused During the Led’s Blinking.
Blister Packaging removed for a more envoconmental Friendly Packaging.
New M8-M10 Rings on The O-11 Enclosed.
Ideal for: AGM, GEL & STD 12V (BATTERIES FROM 3 - 400AH) | 24V (BATTERIES FROM 1-2 200AH) Charging AMPS: 10A (AMPMATIC CURRENT) @ 12V / 5A (AMPMATIC CURRENT) @ 24V CHARGING VOLTS: 12V SELECTION: NOMINAL: 12V RANGE: 0.5V- 14.4V; 24V SELECTION: Nominal: 24V Range: 0.5V - 28.8V OPERATION: SELECTABLE FEATURES: Designed for Sensitive Electronics: The Save Program Has Been Designed for Safe Fully Automatic
Low Volt Start (From 0.5 volts) and Pulse Recovery of Deep Dischard Batteries Connected to Vray Sensitive
Electronics E.G. Light Aircraft, Industrial Equipment
USE: Indoor / Outdoor (Lowest Temperature: -40 ° F / -40 ° C) Input: Global (100-240v 50-60Hz), High Efficient (Cec listed) style: Weatherproof case with wall mols, with 6FT / 180 cm AC Supply Lead and 6FT / 180 cm Charge Lead Ending
In Sae Connector
Save: Low volt start of 0.5v + 2-Step Desulplation Recovery Safe: No Risk of overcharging. Totally Safe for Vehicle Electronics. Sparks Suppressed. Safe for Long-Term Battery
Maintenance Automatic Shut-Down If Short-Circuited Or Battery Disconnected
Included: Weatherproof Battery Lead & Battery Clip Set
Tecmate TM-260V3
Share
