Namz Complete Main Wiring Harness for Harley Davidson

Used as a universal HD style base for rewiring most OEM carbureted HD models or for setting up a custom project.
Works with any standalone, Evo or Twin Cam ignition system.
Designed to operate with a two-position key switch.
A 3-position ignition switch with key start (similar to that found in a car) can be used with a simple wiring modification.
Wiring can be challenging for a non-specialist, so professional installation is recommended.
Includes the following:
- Separate wiring allows use of the white running/amber turn signal LED functions on the front turn signals
- Run, brake and turn signal functions for the rear turn signals
- OEM color-matched wiring with 22-second self-cancelling turn signal module
- The fuse block contains a commonly available, replaceable, full-size starter relay and (3) ATO fuses
- A 30 amp breaker is installed and is ready for any regulator/charging system
- Oil gauge, neutral, high beam and turn signal wiring
- Color-matched handlebar switch wiring found on non-Touring models 1996-1913
- Headlight wiring with headlight socket and terminals
- Front turn signal connectors and terminals
- Rear fender harness with connectors and terminals
- Key switch wiring with ring terminals
- Coil wire with ring terminals, tachometer, horn, oil sending unit, brake switch and neutral switch wiring with terminals
- 3/16", 1/4", 3/8" and 1/2" inner diameter heat shrink sections included
- Thick gauge 12 (+) power and (-) ground cables with terminals for battery connection.
Includes installation instructions / available in PDF format online.

Compatible with: > Universal HD with carburetor