Motogadget m.can Bus OBD For Harley-Davidson 4003000

Motogadget M-Can Data Bus Adapter. For direct connection of Motogadget instruments such as the Motoscope Mini to the motorcycle's control unit.

It plugs directly into the motorcycle's data connector and provides all the information to the odometer (speed, fault codes, RPM...).

• Works with the Harley® OBD system without interfering with it
• With this instrument, it is not necessary to mount any sensors to have all the data on the Motogadget instruments.
• Resistant to vibrations and voltage differences.
• Just plug and play, no programming required.
• Dimensions 38X19X13mm.
• Not valid for models with Can-Bus

Motogadget m.can OBD

The m.can OBD is a digital adapter for the hassle-free direct connection of our instruments to the diagnostic interface of post-2004* Harley-Davidson™ machines. Plug & Drive - it doesn't get easier!

A tiny black box frees you of the necessity to install speed or RPM sensors. Every Harley-Davidson machine later than 2004* is equipped with this 3-pin connector interface. With the m.can OBD digital adapter simply plugged into the interface, your motogadget instruments can read data straight from the SAE J1850 machines data bus: Speed, RPM and MIL (check engine warning light). Voltage supply over the OBD data bus is also optional, making possible the operation of eg the motoscope mini without any installation procedures to the bike.

The instrument is simply connected to the m.can OBD. All compatibility issues between instruments and original speed sensors - especially w/ HD models since 2007 - are solved. Also, the signal for the MIL/malfunction warning is read at the engine as well as peripherally and can be read by installing an LED/indicator light. This means that all original instruments are redundant and may be removed**. The m.can OBD consists of only a tiny, completely molded-in box, an ODB-connector and a sufficiently long connector cable. It is resistant against vibrations and environmental exposure. It's serviceability is ensured even with less than 5V system voltage and meets all SAE-specifications for motorcycles.

* The application is not possible with HD Softtails model year 2011, Dyna model year 2012, XL model year 2014 and up. Also not possible with all other models with HD-LAN system. Fits only models with SAE J1850 system.

** With certain models like the V-ROD, removing the original speedometer may lead to problems with the ECU/immobilizer. Please inquire about this at your trusted dealer or test before actually performing the modification (eg by disconnecting the original speedometer). In some cases, the immobilizer has to be deactivated.