Motogadget, Mo.Lock NFC Digital Ignition Switch for Harley-Davidson

NFC (Near Field Communication) is a variation of RFID (Radio Frequency Identification) and is extremely tamper-proof.
The mo.lock digital ignition switch is used to switch the ignition on and off from a distance of up to approximately 20 to 40 mm.
The mechanical ignition switch can be replaced with the mo.lock ignition switch, allowing for concealed mounting for a clean appearance.
It can directly switch an automotive relay up to 40 A. It comes with 2 "keys", additional keys can be purchased separately and "learned" to switch the mobile lock.
The mo-lock NFC has an RGB LED on the front that indicates the status by color.
The standby current in off mode is only 3.2 mA, reduced to 1.5 mA after 16 hours and to 0.75 mA after 8 days, to protect the battery.
The mo.lock NFC (32mm diameter x 12mm height without terminals) comes with a 40A automotive relay, mounting bracket, 2 NFC keys and detailed instructions.
- NFC technology is tamper resistant
- Each key has a unique code
- The key first activates the mo.lock without touching it and then, via the relay, the entire on-board system
- Neither the key nor the mo.lock NFC suffer mechanical damage or wear.
- The key does not require a battery - No overloading or scorched pins possible due to indirect switching via the 40A main relay
- The mo.lock NFC is very compact and can be hidden in many places.
- Watertight and vibration resistant thanks to molding - under construction
- Keys can be purchased and easily 'learned' to any mo.lock NFC - your integrated locksmith
- A switching distance of 2 to 4 cm ensures comfortable switching and excludes the possibility of accidental activation
- An integrated RGB LED displays the status of the mo.lock when changing, connecting and 'teaching' new keys Transmitter/receiver, diameter of the installed assembly: 32 mm
Height: 12 mm without terminals or support
Weight incl. cable: approx. 35 g
Mounting Threads: 1 M3 threaded hole on the back
Working voltage: 8 V - 18 V
Operating temperature: -20°C to +80°C.
Note: Not suitable for use with active immobilizers.
Note: See 973970 for a replacement 'key'.
Note: See 973968 or 973969 for wiring kits to build the wiring harness for your mo.lock ignition switch.