Camshaft Installation Kit for Harley Davidson M8

487 Reaper® camshaft with chain drive, cam installation kit, Race Series® tappets, one-piece pushrod, Race Series® oil pump, high-flow cam plate, ARP rocker arm studs and nuts, and cam plate/oil pump bolts included in this kit.
487 Reaper Camshaft
Screw-on
Chain drive
Camshaft for 114" and 117" engines
It responds very well to increased diameter and/or compression.
It maintains power at low speeds and offers superior performance at 2950 rpm compared to the stock engine.
RPM range: 2250 - 6100.
Camshaft specifications measured on the engine, at the tappet, at 0.050 with a rocker arm ratio of 1.61. Camshaft installation kit
Includes camshaft bearing, camshaft/crankshaft bolts and gasket/O-ring kit
Race Series® Tappets
Hydraulic roller tappets, standard outside diameter (0.8420-0.8423)
The hydraulic tappets have a total stroke of 0.200, designed with a slower bleed rate to withstand high pressures on the valve springs.
One-piece push rods
High-strength 7/16" diameter tube with a wall thickness of 0.165", precision concentricity, heat-treated with a black oxide finish.
Race Series® Oil Pump
It increases oil pressure, scavenging volume, and engine oil flow.
30% more pressure gear volume than the original.
53% more sweep gear volume than the original.
42% more scavenging volume with port size, passages and holes adapted to the engine crankcase.
46% more oil volume to the crankshaft and connecting rod bearing.
Engine temperatures between 15°C and 25°C cooler.
Oil temperatures between 15°C and 30°C cooler.
10-30 PSI more oil pressure.
Reduces wet sump, exhaust fumes, and oily air filters.
Magnets on the oil pump to help protect the gears and pressure relief valve.
Power gains at the rear wheel of 2 horsepower and 2 ft-lb of torque are achieved.
The results of the FEULING test show a 50% reduction in the engine crankcase oil level.
High flow expansion plate.
7075 billet aluminum.
It screws into the original location.
Made in the USA
Feuling does not recommend making adjustments that exceed the original emissions standards.
Not suitable for water-cooled VVT engines. Kit includes: • Reaper 487 chain-driven camshaft • Camshaft installation kit • Race Series® lifters • One-piece HP+® pushrods • Race Series® oil pump • High-flow cam plate • ARP rocker arm bolts and nuts • Cam plate/oil pump fasteners
For 17-25 M8 water-cooled engines
FEULING PARTS 7273