Skip to product information
With 0.040" MLS (multi-layer steel) cylinder head gaskets.
With 99-10 style breather gaskets and early style 99-04 valve stem seals.
These EST (Extreme Seal Technology) gasket sets are complete with all gaskets, seals and accessories.
-rings used on the specific HD model mentioned, excluding primary seals.
It's the easy way to perform a complete overhaul and have all the necessary gaskets in one package for reassembling the engine.
This EST gasket set contains MLS (Multi-Layer-Steel) head gaskets that eliminate the use of pin O-rings.
Base gaskets are 0.020" thick SLS (single layer steel).
They have 0.005" of high temperature Viton rubber on both sides and are the strongest on the market.
The rocker cover gaskets are also 0.020" thick SLS.
They won't weep, extrude, tear, or become brittle over time.
Exhaust gaskets will not obstruct the flow of exhaust gases and will not wear down the exhaust port.
Valve seals use Viton rubber and external springs for a perfect seal.
- MLS = Multi-Layer Steel Explanation: Consists of a top and bottom layer of stainless spring steel that is covered by high-temperature rubber on both sides.
The inner ring is also made of stainless steel.
These 3-layer gaskets are riveted together, outside the gasket surface, for ease of installation.
MLS head gaskets eliminate the use of O-rings for dowel pins.
Fits: > 99-17 Twin Cam (for earlier 99-04 valve stem seals and 99-10 style breather gaskets)
Cometic Gasket Kit, Engine Only, 4" Diameter for Harley Davidson
164.90 €
With 99-10 style breather gaskets and early style 99-04 valve stem seals.
These EST (Extreme Seal Technology) gasket sets are complete with all gaskets, seals and accessories.
-rings used on the specific HD model mentioned, excluding primary seals.
It's the easy way to perform a complete overhaul and have all the necessary gaskets in one package for reassembling the engine.
This EST gasket set contains MLS (Multi-Layer-Steel) head gaskets that eliminate the use of pin O-rings.
Base gaskets are 0.020" thick SLS (single layer steel).
They have 0.005" of high temperature Viton rubber on both sides and are the strongest on the market.
The rocker cover gaskets are also 0.020" thick SLS.
They won't weep, extrude, tear, or become brittle over time.
Exhaust gaskets will not obstruct the flow of exhaust gases and will not wear down the exhaust port.
Valve seals use Viton rubber and external springs for a perfect seal.
- MLS = Multi-Layer Steel Explanation: Consists of a top and bottom layer of stainless spring steel that is covered by high-temperature rubber on both sides.
The inner ring is also made of stainless steel.
These 3-layer gaskets are riveted together, outside the gasket surface, for ease of installation.
MLS head gaskets eliminate the use of O-rings for dowel pins.
Fits: > 99-17 Twin Cam (for earlier 99-04 valve stem seals and 99-10 style breather gaskets)