HP+® and Race Series® Adjustable Pushrods for Harley-Davidson

Feuling Oil Pump Corp. HP+® and Race Series® Adjustable Pushrods for Harley-Davidson HP+® Adjustable Pushrods Maininin Maximum Valve Lift

INCREASED STIFFNESS AND COLUMN RIGIDITY MAXIMIZING VALVE-TRAIN STABILITY, INCREASING ENGINE RPM HORSEPOWER AND TORQUE OUTPUT

Adjustable pushrods are 3/8 ", 4130 Chrome Moly tube and use a minimal adjustment parameter eliminating flee and loss of valve train-stability problems Associated with Most Adjustable Pushrods

Individual Length Intake and exhaust pushrods keep the adjustment extension to a minimum

Designed to Exceed The Needs of Performance Engines Using Long Lift Camshafts and High Spring Pressures, While Mainintaining Proper and Critical Oil Flow To Top End Valve Gear

FOR USE WITH HYDRAULIC OR SOLID LIFTERS AND STREET OR RACE ENGINES

HP+ and Race Series Pushrods Require Removal of Rocker Covers and Rocker Arm Supports, Fauling Quick Install Rods (Part #0928-0105) Can Be Installed Without Remaking the Rocker Covers, Arms and Supports

Feuling HP+ and Race Series Pushrods Can Be used with The Factory Pushrod Tubes

0928-0009 HP+ Pushrods Have 24 Threads Per Inch Adjustment, Super Strength Single Jam Nut Lock System, Wall Thickness 0.120 "

0928-0010 RACE SERIES PUSHRODS HAVE 24 THREADS PER INCH WITH 0.145 "WALL THICKNESS (recommended when Extreme Valve-Spring Pressures are used)

Made in the U.S.A.

HP+® and Race Series® Adjustable Pushrods

Note: HP+ and Race Series Adjustable Pushrods Can Be Adjusted 0.225 "Over Stock Length To Accommodate Longer Cylinders and Smaller Base Circle Camshafts.

Note: To Ease Installation on Twin Cam Applications Use Pushrod Tube Kit Part #S 0928-0016 OR DS-193758; Not required.

Note: Required Removal of Rocker Covers and Rocker Arm Supports for Installation.