Cansmart™ Gen II V-Twin Controller for Harley-Davidson

The CANsmart controller offers a range of advanced lighting features to help you stand out on the road.
The modulated light function allows you to modulate the low beam or auxiliary lights, increasing visibility for other drivers.
The passing flasher feature allows you to attract the attention of other drivers by pressing the high beam switch three times, causing the auxiliary lights to flash three times faster.
High/Low Beam Sync: Set the low beam and auxiliary headlights to alternate between programmable high/low beams using the factory high beam switch.
On/Off & Dimming: Independently control two sets of lights on/off and change intensity (both day and night) directly from your motorcycle's factory trip switch. Press three times to turn the lights on/off, or press and hold for 3 seconds to enter dimming mode, where you can toggle between 10% and 100% intensity.
Modular Lights: Set your low beam or auxiliary lights to modulate and increase your visibility to other drivers.
Passing Flashers: Need to get someone's attention? Press the high-beam switch three times and the auxiliary lights will flash three times faster.
Cancel with Flashing Light: This function cancels the corresponding auxiliary light when the turn signal is turned on, preventing the auxiliary lights from exceeding the signal strength.
Flashing with turn signal: This feature activates the corresponding auxiliary light when the turn signal is turned on, allowing the auxiliary lights to function as turn signals.
Plug & Play Speaker Installation: Quickly and easily connect high-powered replacement speakers like our SoundBomb™ without the need for an additional harness or relay.
Strobe Light with Horn: Selecting this feature will cause CANsmart™ software to automatically activate the low beam or auxiliary lights when you honk the horn. This feature works whether you have the factory horn or the SoundBomb™ installed.
Deceleration-activated Smart Brake Technology: CANsmart™ detects vehicle speed in real time to activate the auxiliary brake light during deceleration, even before you touch the brake. You can adjust the sensitivity and minimum speed at which the Smart Brake feature will activate.
Switched Power Supply: CANsmart™ offers a universal "accessory" option that simply provides you with clean, switched-mode 12V power. This means any accessory you plug into this circuit will turn on and off with the ignition. Off Delay: You can also set accessories on this circuit to have an off delay. This will keep them on for up to 30 seconds after you turn off the bike.
Integrated Power: The accessory circuit option is ideal for powering your GPS, phone, heated equipment, or any other electronic device.
DENALI DNL.WHS.12300