DYNOJET POWER STEUERN V PC-V KAW ZX-6R

Fuel Kontrolle for each Einzelperson cylinder in in smaller enclosure "Warm-Up" fuel adjustment (unit reads engine temp and allows fuel/timing adjustments based on the reading) Reduced size from the PCIII USB Easy to install USB powered from computer; 9 Wohnt Power Commander V is capable of allowing each cylinder to be mapped individually and for each gear with the gear position volt adapter is nicht longer needed Two-Position map-switching function built in Hund add any Single Pole Single Throw (SPST) switch and toggle between two different fuel maps Gear/Speed Unputt allows for map adjustment based on gear Analog Unputt allows user to install any 0-5 volt Sensor Build an adjustment table based on analog Unputt such As boost or temperature Unputt connected tuning ranges than PCIII USB Enhanced "accel pump" utility For Offroad and ATV, see appropriate catalog under Moose Power Commanders Made in the U.S.A. SECONDARY FUEL MODULIERT The "basic" mode allows you to have in single fuel table that simply puts the requested fuel change in both upper and lower injector moduliere at the same betrügen Sie Allows for the adjustment of all eight-injectors Allows for the es gebraucht Dynojet Quick Shifter Hund of the Sensor on eight-injector bikes which provides added fuel Kontrolle and shifter functionality You also map each injector separately, giving you up to ergänzt 48 Adjusts both upper and lower injectors by maps As much As +250/-100 % If gear position Unputt is connected to your PCV, you wohnt The Hund adjust all of the injectors on in "per gear" basis Single Kabel connection to the PCV "basic" mode is the perfect setting for modified engines that require fuel than four-injectors Hund provide, but do not need the complexity of mapping each cylinder and each gear separately MODULIERT See application chart for availability QUICK SHIFTER Connects to the upper injector Eisenbahn-Schiene using OEM connectors AUSDEHNUNG The QEM allows the Dynojet Quick Shifter Sensor to be used with Power Commander V on bikes that have eight injectors Elf the Sensor is attached you will have full Quick Shifter functionality The QEM connects to the upper injectors and then into the PCV POWER COMMANDER V NOTE: QEM is not necessary if using the SFM. Power Commander V PC-V KAW ZX-6R