Diag4Bike Diagnostic Software HD For Harley-Davidson

Description

Includes functions to perform diagnostics of electronic fuel injection modules and others (i.e. security modules, ABS etc.) through the diagnostic connector on the motorcycle.

Hardware requirements: Windows 7, 10, 11; HDD with free space min. 10 GB; RAM 512 MB (1GB and larger recommended); Free USB port, Bluetooth (depending on the communication interface used).

By purchasing this diagnostic software for PC receives a license for the diagnostic software for Harley-Davidson® & Buell® profi-version v23.x and all the updates for models manufactured up to 2023. Also included is 1 x Serial Adaptor cable 4 pin, 1 x 6 pin (Can Models), 1 x OBD2 and 1 x Tuning Multi Dongle.

Overview of control units that can be diagnosed and functions:

• Ignition Module
• EFI (Electronic Fuel Injection Module), All models
• TSSM (Turn Signal Security Module), Key FOB with button
• HFSM (Hands Free Security Module), Key FOB without button
• BCM (Board Control Module), Key FOB without button
• Gauges (Speedo, Tacho and Instrument Module), All models
• SCM (Security Control Module)
• ABS Module (Delphi + CAN models), All models
• Radio
• Thunder MAX EFI, models with 4-pin Datalink connector
• Read and Clear Diagnostic Trouble Codes, All models, updated trouble codes
• Limits of measured parameters
• Read Identification data (parts number, VIN number), All models
• Monitoring real-time data: throttle position, temperature, oxygen sensors, turn signals etc.
• Test actuators: injectors, coils, main relay, fuel pump, idle, turn signals, tachometer, lamps etc.
• Buell diagnostics is incorporated in Harley-Davidson® diagnostics
• Unit of measure selection (EU: metric/american, US: metric/standard)
• Communication interface is CAN ready, models with 6-pin Datalink connector

Toolbox

• Module replacement (TSSM, HFSM, BCM)
• ABS Service (Bleeding and configuration, Delphi + CAN models), All models up to 2018
• ACR (Automatic compression release during starting)
• Cruise Control, Exhaust actuator, EITMS, enable/disable
• Side Stand Switch configuration, All models
• Intake solenoid valve configuration on CAN models, only CAN models (6-pin Datalink connector)
• Chassis Fan Cooler configuration (enable/disable)
• Rider Assistance – ABS, Traction Control configuration
• Radio Customization – Speakers, ALL models
• J&M Audio configuration – Custom Audio Flash – J&M Corporation (Audio Flash Stage 5)
• ABS Telltale configuration on CAN models
• Radio pairing
• Buell TPS adjustment
• Speedo pairing, CAN models
• Reset AFV, all models and Buell®
• Oil Cooler Fan (enable/disable)
• Idle speed adjustment, all models with Delphi EFI Module up to 2017, for 18-19 models idle speed adjustment available in advanced or professional tuning
• TSSM Customization: PIN read/change, Auto arming, Key FOB assignment instruction
• HFSM Customization: Key FOB, PIN, Auto arming,Sidecar, Service mode
• BCM Customization: Key FOB, PIN, Auto arming, Sidecar, Service mode, Keyless ignition, EBAS, Power Lock Switch for Saddle bags and Trunk
• Lights configuration (disable/enable)
• Front and rear turn signal (LED/Incandescent)
• TPMS configuration: units BCM, Speedo, Radio
• TPMS: assignment of valves
• Fork Lock Switch configuration
• Disarming (HFSM/BCM module), PIN (read) / FOB assignment on armed bike (for BCM modules a CAN disarming cable is needed)
• Odometer units settings, All models (KM / MIL)
• Button with a direct link to the On Line Help (www.doc4bike.eu)
• Displaying battery voltage