XL AND BUELL CAMS FOR HARLEY-DAVIDSON

ANDREWS XL AND BUELL CAMS FOR HARLEY-DAVIDSON V2 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed

Stock base circle sizes allow the use of stock pushrods

V2 and N2 are bolt-in cams for stock applications designed for up to 6000 rpm

N3 cams are bolt-in for 05-16 883/1200 engines with stock springs and heads (cams for 04-06 models with more than .465" lift may need different valves, springs and collars)

V4 and N4 are for stock or modified applications and have a slightly higher idle speed, but can be used with stock hydraulic lifters and springs; rpm range of 2500-6500

V6 and N6 designed for modified 1200s to 80" and/or high-compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500

V8 and N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000

N6 designed for modified 1200s to 80" and/or high-compression pistons: stock springs and hydraulic lifters recommended; rpm range 2500-6500

N8 designed for modified 883, 1100 and 1200 stroker models; stock springs and hydraulic lifters recommended; rpm range 2000-6000

Made in the U.S.A.

XL AND BUELL CAMS