Twin Scan 4 ABS – HD Scan Tool / ABS Brake Bleed (2011-2020)

15500 – Twin Scan 4 ABS – HD Scan Tool / ABS Brake Bleed (2011-2020)

      · Compatible with 2011-2020 Softail^®, 2012-2020 Dyna^® and 2014-2020 Sportster^® and 2014-2020 Touring models with CAN data bus

         NOTE: All models with the CAN data bus utilize the  6-pin Deutsch® style diagnostics connector 

     · Twin Scan 4 ABS – Utilizes a Windows PC for display – Compatible with: Windows XP/7/8/10/11.

     · Reads and clears diagnostic trouble codes from engine control module (ECM), BCM (body control module), speedometer, tach, and anti-skid braking system (ABS)

     · Real time display of engine data on instrument panel type display

     · Anti-skid brake system (ABS) brake bleeding functions.  Individual front and rear ABS brake bleeding functions are available. If you are only servicing the front or rear brake section, you do not need to bleed the opposite section. ABS brake bleeding should only be performed by a trained and experienced mechanic.

     · Built-in data logging. Stores up to one hour of data. Automatically triggers when a trouble code is set. Shows data before and after code is set

     · Includes two analog inputs with 0-20V or ±200V range. Dual channel scopemeter capability for waveform display. The analog inputs can also be used for air/fuel ratio (AFR).

     · Compact size: 3.2″L x 2.2″W x 1.0″H

     · Reprogram and read key fobs, reprogram PIN and disable key fobs to eliminate them in the security system

     · Recalibrate the speedometer, when you install a new speedometer – this feature will allow you to eliminate the VinErr display (Note: Supported up through 2016)

     · The ECM (engine control module) settings feature allows programming of the ACR (automatic compression release), EITMS (engine idle temp management system), cruise control enable/disable and active exhaust setting. Also the ability to clear fuel trims.

     • Capable of reprogramming the idle speed for testing. Simple interface allows fast reading and setting of the idle speed value (Note: Supported up through 2016)

Note: Not all features are available for all models. Most features are available for almost all models through 2016. For example, the 2017 and newer models do not have the ability to adjust idle rpm and speedometer calibration.

The Twin Scan 4 software has an easy to use menu system. All of the tasks are easy to find and select. The main menu will take the user to any of these several major functions: reading and clearing diagnostic trouble codes, displaying real time engine data, displaying logged data in chart format, program keyfob and security settings, analyze AFR data when used with optional WEGO IIID, oscilloscope display of signal waveforms using scopemeter, configuration settings for BCM, ECM & Speedometer, activate modules to test various engine actuators, bcm controlled lights, and speedometer cluster warning lights.