{"product_id":"easy-start-cam-kits-for-harley-davidson-0925-0455","title":"EASY START CAM KITS FOR HARLEY-DAVIDSON","description":"\u003cp\u003eS\u0026amp;S CYCLE EASY START CAM KITS FOR HARLEY-DAVIDSON 585G Easy Start® Cam Kit Start any engine regardless of displacement or compression ratio with a stock starter\u003c\/p\u003e\n\n\u003cp\u003eSave your starter and battery; tested for 10,000 starts without running battery down\u003c\/p\u003e\n\n\u003cp\u003eAllow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance\u003c\/p\u003e\n\n\u003cp\u003eAvailable in chain drive and gear drive versions\u003c\/p\u003e\n\n\u003cp\u003eAll chain-drive cams include installation kit\u003c\/p\u003e\n\n\u003cp\u003eAll gear-drive cams include 4-gear set and installation kit\u003c\/p\u003e\n\n\u003cp\u003eGear-drive cams also available with inner gears only; intended for cam replacement for motors that have already been converted to an S\u0026amp;S gear-drive system\u003c\/p\u003e\n\n\u003cp\u003eMade in the U.S.A.\u003c\/p\u003e\n\n\u003cp\u003eHP103 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eGreat for lighter bikes with strong power from 3500-6000 rpm\u003c\/p\u003e\n\n\u003cp\u003eUse with stock heads (up to 10.2 compression) and low restriction intake and exhaust\u003c\/p\u003e\n\n\u003cp\u003eBolt-in cam for 103\" and 106\" Big Bore Twin Cam motors\u003c\/p\u003e\n\n\u003cp\u003eMR103 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eBolt-in cam for 103\" Twin Cam motors\u003c\/p\u003e\n\n\u003cp\u003eBroad torque curve improves output over stock over the entire rpm range\u003c\/p\u003e\n\n\u003cp\u003eUse with stock heads and low restriction intake and exhaust\u003c\/p\u003e\n\n\u003cp\u003e551 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eCan be used with stock pushrods, springs and lifters\u003c\/p\u003e\n\n\u003cp\u003eOptimized for 88\"\/96\"\/103\" to 106\" Touring bikes with slip-on mufflers and 9.0 to 10.0:1 compression\u003c\/p\u003e\n\n\u003cp\u003eBest bolt-in cam available for most 05-16 Dressers\u003c\/p\u003e\n\n\u003cp\u003ePulls hard from idle to 4000 rpm\u003c\/p\u003e\n\n\u003cp\u003e557 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eBolt-in design\u003c\/p\u003e\n\n\u003cp\u003eDesigned for Tri-Glides and other heavy bikes needing good bottom and mid-range performance\u003c\/p\u003e\n\n\u003cp\u003e570 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eFor 88\/95\/96\/103 cubic-inch engines\u003c\/p\u003e\n\n\u003cp\u003e99-04 models require high-lift springs\u003c\/p\u003e\n\n\u003cp\u003eCompression ratios below 10:1\u003c\/p\u003e\n\n\u003cp\u003e583 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eStrongest from 1500-5000 rpm in a Softail and Dyna application\u003c\/p\u003e\n\n\u003cp\u003eProvides strong low-end torque and horsepower you can really feel\u003c\/p\u003e\n\n\u003cp\u003e99-04 models require high-lift springs\u003c\/p\u003e\n\n\u003cp\u003eOptimized for use as a great overall cam for Softail and Dyna, but can be used in any Big Twin\u003c\/p\u003e\n\n\u003cp\u003e585 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eOptimized for 95\" to 106\" with slip-on mufflers, high-flow air filter and 9.0 to 10.5:1 compression\u003c\/p\u003e\n\n\u003cp\u003eGreat results from 3000-6000 rpm\u003c\/p\u003e\n\n\u003cp\u003e99-04 models require high-lift springs and adjustable pushrods\u003c\/p\u003e\n\n\u003cp\u003e625 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eHigh-lift springs and adjustable pushrods required for all applications\u003c\/p\u003e\n\n\u003cp\u003eFor 95\/96\/103\/110 cubic-inch engines\u003c\/p\u003e\n\n\u003cp\u003eCompression ratios from 10:1 to 10.75:1\u003c\/p\u003e\n\n\u003cp\u003e635 H.O. EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eRPM range 4000-6500\u003c\/p\u003e\n\n\u003cp\u003eFor best results, requires ported heads and low restriction intake\/exhaust\u003c\/p\u003e\n\n\u003cp\u003eHigh-power cam for modified engines, increase compression, high lift springs, adjustable pushrods and large bore throttle body required\u003c\/p\u003e\n\n\u003cp\u003e640 EZ CAMS\u003c\/p\u003e\n\n\n\n\u003cp\u003eFor 95\/96\/103\/110 cubic-inch engines\u003c\/p\u003e\n\n\u003cp\u003eCompression ratios from 10.5:1 to 11.5:1\u003c\/p\u003e\n\n\u003cp\u003eStrongest from 3,000-6,000 rpm\u003c\/p\u003e\n\n\u003cp\u003eHigh-lift springs and adjustable pushrods required\u003c\/p\u003e\n\n\u003cp\u003eEASY START CAM KITS\u003c\/p\u003e\n\n\u003cp\u003eNOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: Due to the inherent characteristics of gear drives, you may experience more valve train noise.\u003c\/p\u003e\n\n\u003cp\u003eNOTE: Not for models with OEM compression releases.\u003c\/p\u003e","brand":"S\u0026S CYCLE","offers":[{"title":"Default Title","offer_id":31891565772885,"sku":"P09250455","price":1435.81,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1606\/2595\/products\/609A0A32-D128-4C3D-9EE1-498FF3C4BF82_9a1db6f3-08f7-44fe-98ee-e7e9d11b3fe4.jpg?v=1584743283","url":"https:\/\/california-motorcycles.com\/products\/easy-start-cam-kits-for-harley-davidson-0925-0455","provider":"California Motorcycles","version":"1.0","type":"link"}