{"product_id":"cams-for-twin-cam-for-harley-davidson-ds199251","title":"CAMS FOR TWIN CAM FOR HARLEY-DAVIDSON","description":"\u003cp\u003e ANDREWS CAMS FOR TWIN CAM FOR HARLEY-DAVIDSON 59G Series Grind Cams Made in the USA\u003c\/p\u003e\n\n\n\u003cp\u003e TW9 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Use stock springs\u003c\/p\u003e\n\n\n\u003cp\u003e Bolt-in cam with more power through the entire rpm range (1000-5400 rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e 21 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Can be used with stock valve springs and tappets\u003c\/p\u003e\n\n\n\u003cp\u003e Works well with carbs or fuel injection\u003c\/p\u003e\n\n\n\u003cp\u003e Similar to the EV-23 cam\u003c\/p\u003e\n\n\n \u003cp\u003eRun best with low-restriction exhausts (1700-5200 rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e Bolt-in cam for more torque with stock compression\u003c\/p\u003e\n\n\n\u003cp\u003e Cams work well with fuel injection or carburetor models\u003c\/p\u003e\n\n\n\u003cp\u003e 26 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e For two-up touring\u003c\/p\u003e\n\n\n\u003cp\u003e Works well with carbs or fuel injection\u003c\/p\u003e\n\n\n\u003cp\u003e Bolt-in cam for lower rpm torque on heavier bikes\u003c\/p\u003e\n\n\n\u003cp\u003e Good power from 1800-5500 rpm\u003c\/p\u003e\n\n\n\u003cp\u003e Can be used with stock springs and tappets\u003c\/p\u003e\n\n\n\u003cp\u003e 31 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Similar to 37G but different timing (2000-5800 rpm power range)\u003c\/p\u003e\n\n\n\u003cp\u003e Great cam for motors with 95+ inches and 10:1 compression ratio\u003c\/p\u003e\n\n\n\u003cp\u003e Lower TDC lift means easy installation\u003c\/p\u003e\n\n\n\u003cp\u003e Can be used with stock springs and tappets\u003c\/p\u003e\n\n\n\u003cp\u003e 32 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e High-lift version of 31G. Much more (+20%) power through rpm range with 10:1+ compression ratio\u003c\/p\u003e\n\n\n\u003cp\u003e 2800-5800 rpm range\u003c\/p\u003e\n\n\n\u003cp\u003e 37 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Smooth idle with broad torque band\u003c\/p\u003e\n\n\n\u003cp\u003e Bolt-in cams\u003c\/p\u003e\n\n\n\u003cp\u003e Run best with low-restriction exhausts (2200-5800 rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e Can be used with stock valve springs and tappets\u003c\/p\u003e\n\n\n\u003cp\u003e Works well with carbs or fuel injection\u003c\/p\u003e\n\n\n\u003cp\u003e TW48 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n \u003cp\u003eBroad tip cams for baggers with stock motors; max torque at low and mid rpm ranges\u003c\/p\u003e\n\n\n\u003cp\u003e Use stock springs\u003c\/p\u003e\n\n\n\u003cp\u003e 50 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Designed for 95\"+ engines with 9.25:1 to 9.50:1 compression ratio and stock heads\u003c\/p\u003e\n\n\n\u003cp\u003e Can be used with stock valve springs and tappets\u003c\/p\u003e\n\n\n\u003cp\u003e Cams work best at higher rpm of 2500-6000\u003c\/p\u003e\n\n\n\u003cp\u003e For lighter bikes\u003c\/p\u003e\n\n\n\u003cp\u003e 54 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Cams work best at rpm range of 2200-5600\u003c\/p\u003e\n\n\n\u003cp\u003e Designed for 96\" and 103\" engines with up to 10:1 compression ratio\u003c\/p\u003e\n\n\n\u003cp\u003e 55 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Designed for engines with 9.5:1 compression ratio or higher with 88\"-95\"\u003c\/p\u003e\n\n\n\u003cp\u003e Cams for maximum torque and horsepower at higher rpm ranges (2600-6000+ rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e Coil bind must be checked, but stock tappets can be used\u003c\/p\u003e\n\n\n\u003cp\u003e 57 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Cams work best at rpm range of 2200-5600\u003c\/p\u003e\n\n\n\u003cp\u003e Bolt-in broad tip cams; 96\", 103\" Limited and 110\" CVO engines\u003c\/p\u003e\n\n\n\u003cp\u003e 59 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Maximum torque and HP at middle and upper rpm ranges (2400-6200 rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e Coil bind must be checked, but can use stock tappets\u003c\/p\u003e\n\n\n\u003cp\u003e For 95\"+ engines with 10:1 compression ratio or higher\u003c\/p\u003e\n\n\n\u003cp\u003e 60 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n \u003cp\u003eCoil bind and valve-to-valve and valve-to-piston clearance must be checked\u003c\/p\u003e\n\n\n\u003cp\u003e Maximum torque and HP at middle and upper rpm ranges (2700-6500+ rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e Designed for 95\"+ engines with better head work\u003c\/p\u003e\n\n\n\u003cp\u003e 67 SERIES GRIND CAMS\u003c\/p\u003e\n\n\n\n\n\u003cp\u003e Hi-lift Performance cams for 95-107+ inches, 10.0 to 10.8 compression ratio with high-flow head setup (2600-6400+ rpm)\u003c\/p\u003e\n\n\n\u003cp\u003e CAMS FOR TWIN CAM\u003c\/p\u003e\n\n\n\u003cp\u003e Andrews Products grinds its cams with the help of a computer with cam design capabilities. This superior technology gives the maximum in both performance and reliability. Only the best alloy steel billets and heat-treating processes are used. Furthermore, the power in Harley's Twin Cam engine can be made even more convincing when superior Andrews computer-designed high-performance cams are installed.\u003c\/p\u003e\n\n\n\u003cp\u003e NOTE: All Andrews gear-driven cams require four-gear set for installation (DS-199532 for 99-06 applications; 0925-0166 or 0925-0152 for 07-17 Twin Cam and 06 Dyna applications).\u003c\/p\u003e\n\n\n \u003cp\u003eNOTE: Chain Driven Cams: 00-06 model cams use a splined cam drive sprocket. These cams will fit in the 1999 Twin Cam engine, but the splined cam drive sprocket OEM #25716-99 or DS-199175 must be used.\u003c\/p\u003e\n\n\n\u003cp\u003e NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.\u003c\/p\u003e\n\n\n\u003cp\u003e NOTE: 59G, 60G and 64G cams are for highly tuned engines and require the knowledge of an expert engine builder for proper setup and installation.\u003c\/p\u003e","brand":"ANDREWS","offers":[{"title":"Default Title","offer_id":31891571867733,"sku":"PDS199251","price":567.25,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1606\/2595\/products\/DC5CC4FE-D240-4C8E-A63C-C427DB1C569A.jpg?v=1584743477","url":"https:\/\/california-motorcycles.com\/en\/products\/cams-for-twin-cam-for-harley-davidson-ds199251","provider":"California Motorcycles","version":"1.0","type":"link"}